Fujitsu Stylistic 3400 User Manual - Page 2

Browse online or download pdf User Manual for Tablet Fujitsu Stylistic 3400. Fujitsu Stylistic 3400 2 pages. Wall-mount cradle
Also for Fujitsu Stylistic 3400: User Manual (3 pages), Installation Manual (4 pages), Operating Instructions (1 pages), Installation And User Manual (8 pages), Installation Manual (1 pages), Assembly And Use Instructions (4 pages)

Print Page

Using the External Battery Charger

Please note that this equipment can be used only for

charging the Stylistic 3400 battery pack FMW42BP1.

Using this charger with other battery packs may cause

damage to both the charger and the battery pack

connector pins.

To charge a battery pack:

1. Connect the AC adapter to the battery charger, then

plug the adapter to a main power outlet. The power

indicator should turn on (green).

2. Install up to two discharged battery packs into the

battery slots, as shown in Figure 2.

When the battery pack is fully charged (at 100% level),

the indicator changes to green and charging

automatically stops.

The charged battery pack is now ready to use with your

Stylistic 3400 pen tablet.

3. When the charger is not in use, disconnect the AC

adapter.

Issues to consider when using the battery charger:

• Only one battery pack can be charged at a time.

If two battery packs are inserted, they will be

charged in the order they were inserted.

• You can insert up to two battery packs at a time in

the battery charger. If you inserted two battery packs,

either battery pack can be inserted or removed

independently.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Fujitsu PC Corporation could void the user's authority to operate this

equipment.

3/00

BATTERY

PACKS

Figure 2. Installing battery packs

FCC Notice

2 of 2

58-0714-00A