Fujitsu D2932 Technical Manual - Page 20

Browse online or download pdf Technical Manual for Motherboard Fujitsu D2932. Fujitsu D2932 32 pages. For rx330 s1

Print Page
Temperature / system monitoring
Features
Fan control
The fans are controlled according to temperature.
Sensor monitoring
The removal of, or a fault in, a temperature sensor is detected. Should this
happen all fans monitored by this sensor run at maximum speed, to achieve the
greatest possible protection of the hardware.
Voltage monitoring
The most important voltages are monitored. When a voltage exceeds warning
level high or falls below warning level low an alert will be generated. Adequate
measurements can be done by running agents.
Cover monitoring
Opening of the cover causes an immediately shutdown of the system.
Unauthorised opening of the cover is detected, even when the system is
switched off. However, this will only be indicated when the system is switched
on again
System Event Log (SEL)
All monitored events of the system board are recorded in the System Event Log.
They could be retrieved after a system reboot via ServerView.
20
Technical Manual
D2440/D2932 (RX330 S1)