Fujitsu D2932 Technisch handboek - Pagina 20

Blader online of download pdf Technisch handboek voor {categorie_naam} Fujitsu D2932. Fujitsu D2932 32 pagina's. For rx330 s1

Temperature / system monitoring

Features

Fan control

The fans are controlled according to temperature.

Sensor monitoring

The removal of, or a fault in, a temperature sensor is detected. Should this

happen all fans monitored by this sensor run at maximum speed, to achieve the

greatest possible protection of the hardware.

Voltage monitoring

The most important voltages are monitored. When a voltage exceeds warning

level high or falls below warning level low an alert will be generated. Adequate

measurements can be done by running agents.

Cover monitoring

Opening of the cover causes an immediately shutdown of the system.

Unauthorised opening of the cover is detected, even when the system is

switched off. However, this will only be indicated when the system is switched

on again

System Event Log (SEL)

All monitored events of the system board are recorded in the System Event Log.

They could be retrieved after a system reboot via ServerView.

Technical Manual

D2440/D2932 (RX330 S1)