Fujitsu FLASH-CAN-48P User Manual - Page 6

Browse online or download pdf User Manual for Motherboard Fujitsu FLASH-CAN-48P. Fujitsu FLASH-CAN-48P 33 pages. F²mc-16lx family

Print Page

1 Overview

The FLASH-CAN-48P is a low cost multifunctional evaluation board for 16-Bit Fujitsu

Flash microcontrollers with FPT-48P-M26 package.

It can be used stand alone for software development and testing or as a simple target board

to work with the emulator system.

The board allows the designer immediately to start with the software development before his

own final target system is available.

 Supports 16-Bit microcontroller in FPT-48P-M26 package (7x7x1.5mm, 0.5 mm pitch)

 MB90385 Series: MB90V495G, MB90F387/S

 MB90455 Series: MB90V495G, MB90F455/S, MB90F456/S, MB90F457/S

 MB90895 Series: MB90V495G, MB90F897/S

 MB90360 Series: MB90V340A, MB90F36x

 MB90960 Series: MB90V340A, MB90F96x

 9-12V unregulated external DC power supply usable

 5V internal power supply, Power-LED

 In-Circuit serial Flash programming

 All resources available for evaluation

 All pins routed to connectors

 4 MHz main-crystal, 32kHz subclock-crystal (selectable by jumpers)

 Two UART Interfaces (MB90385 and MB90455 series supports only one UART)

 One LIN-Transceiver

 One High-Speed CAN Transceiver (MB9096x does not support CAN)

 8 User LEDs, optional: alphanumeric standard LC-Display connectable instead of LEDs

 Reset-Button, Reset-LED

 5 User-buttons configurable for INT4, INT5, TIN0, IN0 and ADTG

 64pin VG connector (same pin-out as Flash-CAN-64P-M09-V2)

The target board will be delivered with the MB90F387 microcontroller.

This microcontroller contains a 'burn-in'-boot loader for programming the flash.

This board must only be used for test applications

in an evaluation laboratory environment.

UG-900002-20

FLASH-CAN-48P

Chapter 1 Overview

- 6 -