Fujitsu FLASH-CAN-48P Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Материнская плата Fujitsu FLASH-CAN-48P. Fujitsu FLASH-CAN-48P 33 страницы. F²mc-16lx family
Печатать страницу
1 Overview
1.1 Abstract
The FLASH-CAN-48P is a low cost multifunctional evaluation board for 16-Bit Fujitsu
Flash microcontrollers with FPT-48P-M26 package.
It can be used stand alone for software development and testing or as a simple target board
to work with the emulator system.
The board allows the designer immediately to start with the software development before his
own final target system is available.
1.2 Features
Supports 16-Bit microcontroller in FPT-48P-M26 package (7x7x1.5mm, 0.5 mm pitch)
MB90385 Series: MB90V495G, MB90F387/S
MB90455 Series: MB90V495G, MB90F455/S, MB90F456/S, MB90F457/S
MB90895 Series: MB90V495G, MB90F897/S
MB90360 Series: MB90V340A, MB90F36x
MB90960 Series: MB90V340A, MB90F96x
9-12V unregulated external DC power supply usable
5V internal power supply, Power-LED
In-Circuit serial Flash programming
All resources available for evaluation
All pins routed to connectors
4 MHz main-crystal, 32kHz subclock-crystal (selectable by jumpers)
Two UART Interfaces (MB90385 and MB90455 series supports only one UART)
One LIN-Transceiver
One High-Speed CAN Transceiver (MB9096x does not support CAN)
8 User LEDs, optional: alphanumeric standard LC-Display connectable instead of LEDs
Reset-Button, Reset-LED
5 User-buttons configurable for INT4, INT5, TIN0, IN0 and ADTG
64pin VG connector (same pin-out as Flash-CAN-64P-M09-V2)
The target board will be delivered with the MB90F387 microcontroller.
This microcontroller contains a 'burn-in'-boot loader for programming the flash.
This board must only be used for test applications
in an evaluation laboratory environment.
UG-900002-20
FLASH-CAN-48P
Chapter 1 Overview
- 6 -
© Fujitsu Semiconductor Europe GmbH