Fujitsu MB91460 SERIES Getting Started - Page 11

Browse online or download pdf Getting Started for Motherboard Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 41 pages. 32-bit microcontroller
Also for Fujitsu MB91460 SERIES: User Manual (45 pages), Application Note (23 pages), Application Note (26 pages), Application Note (29 pages), Application Note (29 pages)

Print Page
Fujitsu MB91460 SERIES Getting Started

4.3.2 Mounting the Evaluation MCU

1. Press down the top of the IC socket. Take care when you press the IC socket; Hold
the board against the pressure not to bend the board.
2. Confirm that the hook is open, and put the evaluation MCU on the socket. The index
shows the A1 pin of the evaluation MCU.
3. Release the socket slowly and confirm that the evaluation MCU is fastening to the
socket.
The following figure shows the socket of the evaluation MCU MB91V460.
© Fujitsu Microelectronics Europe GmbH
Getting Started
Chapter 4 Installation of the Emulation System
Figure 3: Mounting the Evaluation MCU
- 11 -
MCU-AN-391005-E-V17