Fujitsu MB91460 SERIES Getting Started - Page 10

Browse online or download pdf Getting Started for Motherboard Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 41 pages. 32-bit microcontroller
Also for Fujitsu MB91460 SERIES: User Manual (45 pages), Application Note (23 pages), Application Note (26 pages), Application Note (29 pages), Application Note (29 pages)

Print Page

4.3 Connecting the Emulation System

The following connections have to be established:

4.3.1 Cabling the Emulator MB2198-01

There are some connections necessary for the emulator MB2198-01. The following lists

each step.

1. Connect the emulator MB2198-01 (1) e.g. with the USB-Cable (2) to the USB port of

the PC. (Analogously for other connection types. Please also refer to chapter 7)

2. Plug the DSU-FR Cable MB2198-10 (3) into the port labelled 'DSU Cable' (4). The

correct position of cable and port is marked with arrows.

3. Finally, connect the 16 V DC power supply (5) to the port 'DC in' (6) and to 230 V.

Please, be aware, that the emulator is switched off.

Figure 2 illustrates the necessary connections of the emulator MB2198-01.

MCU-AN-391005-E-V17

Getting Started

Chapter 4 Installation of the Emulation System

Figure 2: Connections of the Emulator MB2198-01

- 10 -