Fujitsu MB91460 SERIES Começar a trabalhar - Página 10
Procurar online ou descarregar pdf Começar a trabalhar para Placa-mãe Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 41 páginas. 32-bit microcontroller
Também para Fujitsu MB91460 SERIES: Manual do utilizador (45 páginas), Nota de aplicação (23 páginas), Nota de aplicação (26 páginas), Nota de aplicação (29 páginas), Nota de aplicação (29 páginas)
4.3 Connecting the Emulation System
The following connections have to be established:
4.3.1 Cabling the Emulator MB2198-01
There are some connections necessary for the emulator MB2198-01. The following lists
each step.
1. Connect the emulator MB2198-01 (1) e.g. with the USB-Cable (2) to the USB port of
the PC. (Analogously for other connection types. Please also refer to chapter 7)
2. Plug the DSU-FR Cable MB2198-10 (3) into the port labelled 'DSU Cable' (4). The
correct position of cable and port is marked with arrows.
3. Finally, connect the 16 V DC power supply (5) to the port 'DC in' (6) and to 230 V.
Please, be aware, that the emulator is switched off.
Figure 2 illustrates the necessary connections of the emulator MB2198-01.
MCU-AN-391005-E-V17
Getting Started
Chapter 4 Installation of the Emulation System
Figure 2: Connections of the Emulator MB2198-01
- 10 -
© Fujitsu Microelectronics Europe GmbH