Fujitsu MB91460 SERIES Application Note - Page 18

Browse online or download pdf Application Note for Motherboard Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 29 pages. 32-bit microcontroller
Also for Fujitsu MB91460 SERIES: User Manual (45 pages), Getting Started (41 pages), Application Note (23 pages), Application Note (26 pages), Application Note (29 pages)

Fujitsu MB91460 SERIES Application Note
DIRECT MEMORY ACCESS
Chapter 2 Direct Memory Access

2.4.5 External Bus Request Arbitration (BRQ)

When a device is operating in external bus extended mode, an external bus request (BRQ)
function can be used. Using BRQ pin any external peripheral can request to use the external
bus for the configured chip select area.
While the BRQ is asserted by any external device and the access is granted. Then such
external device controls the external bus and performs the data transfer. During such
transfer, if DMAC requires to use the external bus for the transfer, the DMAC has to wait
until the BRQ is active. Once BRQ is released the DMAC can use external bus.
If the DMAC is already using the external bus and the BRQ is asserted DMAC transfer is
temporarily stopped. Once BRQ is released the DMAC can use external bus.
If the DMAC transfer through the external bus and BRQ is simultaneous then DMAC waits till
the external device finishes transfer and then DMAC takes over.
MCU-AN-300059-E-V11
- 18 -
© Fujitsu Microelectronics Europe GmbH