Fujitsu MB91460 SERIES Uygulama Notu - Sayfa 18

Anakart Fujitsu MB91460 SERIES için çevrimiçi göz atın veya pdf Uygulama Notu indirin. Fujitsu MB91460 SERIES 29 sayfaları. 32-bit microcontroller
Ayrıca Fujitsu MB91460 SERIES için: Kullanıcı Kılavuzu (45 sayfalar), Başlarken (41 sayfalar), Uygulama Notu (23 sayfalar), Uygulama Notu (26 sayfalar), Uygulama Notu (29 sayfalar)

Fujitsu MB91460 SERIES Uygulama Notu
DIRECT MEMORY ACCESS
Chapter 2 Direct Memory Access

2.4.5 External Bus Request Arbitration (BRQ)

When a device is operating in external bus extended mode, an external bus request (BRQ)
function can be used. Using BRQ pin any external peripheral can request to use the external
bus for the configured chip select area.
While the BRQ is asserted by any external device and the access is granted. Then such
external device controls the external bus and performs the data transfer. During such
transfer, if DMAC requires to use the external bus for the transfer, the DMAC has to wait
until the BRQ is active. Once BRQ is released the DMAC can use external bus.
If the DMAC is already using the external bus and the BRQ is asserted DMAC transfer is
temporarily stopped. Once BRQ is released the DMAC can use external bus.
If the DMAC transfer through the external bus and BRQ is simultaneous then DMAC waits till
the external device finishes transfer and then DMAC takes over.
MCU-AN-300059-E-V11
- 18 -
© Fujitsu Microelectronics Europe GmbH