A-Neu Video HD-44G Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Matrix Switcher A-Neu Video HD-44G. A-Neu Video HD-44G 20 pages. 4x4 hdmi matrix switcher

Print Page

NEUVIDEO

FRONT PANEL

POWER SWITCH:

The power switch turns the unit ON and OFF. The LCM will illuminate red to indicate that the switcher is ON

and is receiving power. The switcher will remember the last state during a power cycle. When power is removed and resorted, the last

configuration will be evoked.

INPUT STATUS DISPLAY:

OUTPUT STATUS DISPLAY:

DESTINATION SELECT BUTTONS:

1 thru 4 select buttons are provided for each destination assignment. Routing can be source to destination or one source to multiple

destinations.

Example: Press Destination 1, 2, 4 then press Source 2. It will route Input 2 to Output 1, 2, 4 respectfully.

EDID MODE SELECT BUTTONS:

IR SENSOR:

The IR sensor receives IR commands from the supplied remote control or third party IR emitter.

SOURCE SELECT BUTTONS:

FUNCTION KEY - ALL:

Indicates system setup information and current matrix route cross-points.

Each Output (destination) channel shows which input (source) it is assigned.

Indicates system setup information and current matrix route cross-points. Separate outputs

Used to select an EDID mode using Input buttons #1 and #2.

Separate Inputs 1 thru 4 select buttons are provided each source selection.

Disables (mutes) video on all destinations OR selects the same source to all destinations.

Option 1

- Press ALL followed by OFF button. The display will show "0" indicating all destinations

have no video selected.

Option 2

- Press ALL followed by Source 1 THRU 4. The display will show the source selected.

- Press ENTER. The pre-set source selection will be assigned all destinations.

FRONT PANEL