A-Neu Video HD-44G Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Comutador de matriz A-Neu Video HD-44G. A-Neu Video HD-44G 20 páginas. 4x4 hdmi matrix switcher

Imprimir página
A
NEUVIDEO

FRONT PANEL

POWER SWITCH:
The power switch turns the unit ON and OFF. The LCM will illuminate red to indicate that the switcher is ON
q
and is receiving power. The switcher will remember the last state during a power cycle. When power is removed and resorted, the last
configuration will be evoked.
INPUT STATUS DISPLAY:
w
OUTPUT STATUS DISPLAY:
e
DESTINATION SELECT BUTTONS:
r
1 thru 4 select buttons are provided for each destination assignment. Routing can be source to destination or one source to multiple
destinations.
Example: Press Destination 1, 2, 4 then press Source 2. It will route Input 2 to Output 1, 2, 4 respectfully.
EDID MODE SELECT BUTTONS:
t
IR SENSOR:
The IR sensor receives IR commands from the supplied remote control or third party IR emitter.
y
SOURCE SELECT BUTTONS:
u
FUNCTION KEY - ALL:
i
Indicates system setup information and current matrix route cross-points.
Each Output (destination) channel shows which input (source) it is assigned.
Indicates system setup information and current matrix route cross-points. Separate outputs
Used to select an EDID mode using Input buttons #1 and #2.
Separate Inputs 1 thru 4 select buttons are provided each source selection.
Disables (mutes) video on all destinations OR selects the same source to all destinations.
Option 1
- Press ALL followed by OFF button. The display will show "0" indicating all destinations
have no video selected.
Option 2
- Press ALL followed by Source 1 THRU 4. The display will show the source selected.
- Press ENTER. The pre-set source selection will be assigned all destinations.
3
FRONT PANEL