AEG CHDF 6260 Operating And Installation Manual - Page 19

Browse online or download pdf Operating And Installation Manual for Ventilation Hood AEG CHDF 6260. AEG CHDF 6260 21 pages. Electrolux cooktop user manual
Also for AEG CHDF 6260: Operating And Installation Instructions (21 pages), Operating And Installation Instructions (21 pages), Operating And Installation Manual (22 pages), Operating And Installation Instructions (23 pages), Operating And Installation Instructions (22 pages)

Print Page

Removing the hood from the wall unit

If, for technical reasons (extraction version/recirculation version

conversion) the extractor hood has to be removed from the wall unit,

proceed as follows:

• Fully withdraw the visor and remove the grease filter.

• Loosen the 4 or 6 mounting screws of the hood (wall unit mounting).

• To loosen both mounting claws (installation aids), place a max 3

mm dia. Phillips screw-driver in the spring opening and

simultaneously press the springs inwards (towards the appliance

housing). Fig. 14.

Fig. 14

Important: Hold the hood firmly!

Adjusting the extractor part (E - Fig. 1) - Fig. 15

On wall units with a body depth of 275 mm to 335 mm, the visor depth

can be adjusted as follows:

• Remove both grease filters.

• Loosen the screws on both end-stop brackets and set the visor

depth (min. 275 mm, max. 335 mm).

• Refit the screws.

• Refit the grease filters.

Fig. 15