AEG CHDF 6260 Bedienings- en installatiehandleiding - Pagina 19

Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} AEG CHDF 6260. AEG CHDF 6260 21 pagina's. Electrolux cooktop user manual
Ook voor AEG CHDF 6260: Bedienings- en installatie-instructies (21 pagina's), Bedienings- en installatie-instructies (21 pagina's), Bedienings- en installatiehandleiding (22 pagina's), Bedienings- en installatie-instructies (23 pagina's), Bedienings- en installatie-instructies (22 pagina's)

Removing the hood from the wall unit

If, for technical reasons (extraction version/recirculation version

conversion) the extractor hood has to be removed from the wall unit,

proceed as follows:

• Fully withdraw the visor and remove the grease filter.

• Loosen the 4 or 6 mounting screws of the hood (wall unit mounting).

• To loosen both mounting claws (installation aids), place a max 3

mm dia. Phillips screw-driver in the spring opening and

simultaneously press the springs inwards (towards the appliance

housing). Fig. 14.

Fig. 14

Important: Hold the hood firmly!

Adjusting the extractor part (E - Fig. 1) - Fig. 15

On wall units with a body depth of 275 mm to 335 mm, the visor depth

can be adjusted as follows:

• Remove both grease filters.

• Loosen the screws on both end-stop brackets and set the visor

depth (min. 275 mm, max. 335 mm).

• Refit the screws.

• Refit the grease filters.

Fig. 15