Kohler 23776T-7 Installation Instructions - Page 3

Browse online or download pdf Installation Instructions for Plumbing Product Kohler 23776T-7. Kohler 23776T-7 4 pages.

Print Page
SERVICE PARTS
23775T-7
1354509**
1371430**
1354506
**Color code must be specified when ordering.
1388387-2A-A
DTV MODE
Bath Filler UI
1354508**
1355194
OPERATION INSTRUCTIONS
On/Off Symbol
Temperature Setting Mark
SETTINGS
Temperature
Indicator
6
1388387-2A-A
How to Operate the Interface
On/Off Symbol - (Top Button)
Turn the bath spout On/Off.
Bath Spout Symbol - (Bottom Button)
Turn bath spout On/Off.
NOTES: Press either the On/Off button or bath spout
button can turn on/off the spout. But the water flowrate
is different under the two ways.
Rotary movement selects showering temperature. The
Bath Spout Symbol
larger the number which the temperature setting mark
is aligned, the higher the temperature. "C" is for full cold
Temperature Indicator
water, "H" is for pre-set Max temperature.
NOTES: Press bath spout symbol to start the bathfill
mode, the water temperature and bathfill time are
pre-set. The factory default Bath Fill Preset is 5 minutes
duration. If adjust the temperature indicator, it will exit
the bathfill mode, the longest bath fill duration is 30
minutes.
NOTES:The factory default maximum temperature is
set to 45°C.
When you turn on the product and water begins to flow,
the temperature indicator light will begin to flash to
show the product is warming up. Once the preselected
outlet temperature has been reached, the indicator light
will stop flashing.
Maximum Temperature Setting
When the spout is in the off position, hold down the
On/Off button (top half) for 10 seconds, the lights will
pulse slow to indicate setting mode.
Adjust temperature indicator according to the table
below to set desired maximum temperature.The scale
Temperature Setting Mark
on the indicator which the temperature setting mark is
aligned represents the selected maximum temperature.
Caution! Make sure that the maximum outlet tempera-
ture is suitable and safe for all users.
Temp Indicator Position
C
1 - 3
4 - 6
7 - 9
H
Press the On/Off button to set the maximum
temperature.The temperature indicator light will flash
three times to confirm the setting has been completed.
Temp (°C)
Exit No Change
41
45
48
Exit No Change
3