Kohler 23776T-7 Installation Instructions - Page 4

Browse online or download pdf Installation Instructions for Plumbing Product Kohler 23776T-7. Kohler 23776T-7 4 pages.

Print Page

Temperature

Indicator

TROUBLESHOOTING

WARNING: Risk of electric shock. Disconnect power before performing any maintenance. When discon-

nected, the product will no longer be electrically live, which will eliminate the risk of electric shock.

CAUTION: Risk of personal injury. The valve may contain hot water; be careful when draining any residual

water.

NOTES: Turn off the power and water supply to the valve before performing any maintenance to the valve.

It is recommended that any valve maintenance should be performed by a Kohler Co. Authorized Service

Representative.

This troubleshooting guide is for general aid only. For service and installation issues or concerns, call 800-820-

2628.

Troubleshooting Table

Symptoms

Probable Cause

1. No Lights on

A. Not connected to valve.

interface.

B. No power to valve.

C. Faulty user interface.

2. Interface Button

A. Stuck button on interface.

Flashing (2 times

a second).

B. Intermittent connection to valve.

C. Digital Mixing Valve fault.

D.Wrong interface connected .

1388387-2A-A

Bath Fill Preset

The water temperature and bath filling can be preset

as needed, which brings users an one-button start

bath experience. The setting steps are as follows:

Push down the plug in the bath.

Hold down the Bath Symbol Button (bottom half) for

5~10 Seconds approx. until the Bath Symbol Button

flashes. Press the Bath Symbol Button to start the

bath filling.

Rotate the interface to adjust the temperature indica-

tor to set the temperature. On reaching the ideal fill

level and desired temperature, press the Bath Symbol

Button to stop the water, the temperature indicator will

flash three times to confirm and save the Bath Fill

Preset.

NOTES: The preset fill duration will affect the water

volume in the bathtub. If the bath filling is not the

desired water volume, the user needs to reset it.

Note! Factory Default Bath Fill Preset is 5 minutes

duration at 42°C Inlet Temperature.

Bath Fill Preset temperature will calculate the average

temperature over the Preset fill duration & take into

account adjustments made to the User Interface

rotary temperature dial during this time period.

NOTES: Press the On/Off symbol button(top half) can

exit the setting.

Recommended Action

A. Check connections, connect if needed.

B. Check power supply, connect if needed.

C. Contact your Kohler Co. Authorized

Service Representative.

A. Contact your Kohler Co. Authorized

Service Representative.

B. Check connections, connect if needed.

C. Contact your Kohler Co. Authorized

Service Representative.

D. Contact your Kohler Co. Authorized

Service Representative.

Symptoms

3. Temperature

A. Over temperature error

Indicator and

Interface，button

flashing (2 times

a second).

4. All Interface

Button Flashing (2

times a second) &

Temperature

Indicator and

Interface button

flashing (2 times a

second)

CLEANING INSTRUCTIONS

All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft

cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc. which could

adversely affect the finish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Kohler faucets and fittings.

Statistics of Contents of Toxic or Hazardous Substances or Elements

Part name

Interface Assy

Connection Assy

Mounting Assy

○：Indicates that the substance in the material composition is below the high limits of the current requirements

in GB/T 26572.

×：Indicates that at least one of the homogeneous substance in the material composition is above the high

limits of the current requirements in GB/T 26572.

Note: the information provided is based on the supplier data and Kohler inspection results. The product is

designed not to hurt the environment. Under current technology, all hazardous materials have been used in the

smallest amounts possible. Kohler will strive to reduce the use of these hazardous materials used in this product.

The product "service life for environment protection" is 10 years; Kohler Company will specify product

service life based on product characteristics. The product "service life for environment protection" is only

effective when the product is used as described in the product specification.

1388387-2A-A

Troubleshooting Table(cont.)

Probable Cause

A. Contact your Kohler Co. Authorized

Service Representative.

A. Turn off the mains power to the product &

reboot after 10 seconds. If the fault is not

rectified, then Contact your Kohler Co.

Authorized Service Representative.

Toxic or Hazardous Substance or Elements

Hexavalent

Lead

Mercury

Cadmium

Chromium

(Pb)

(Hg)

(Cd)

（Cr(VI)）

○

Recommended Action

Polybrominated

biphenyls

Diphenyl Ethers

（PBB）

（PBDE）

○