A-Neuvideo ANI-0104POE-XT Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Cables and connectors A-Neuvideo ANI-0104POE-XT. A-Neuvideo ANI-0104POE-XT 12 pages. Extender splitter

OPERATION CONTROLS & FUNCTIONS
Transmitter Panel
When the Transmitter is powered on, the red power LED will illunminate.
q POWER LED:
w CAT OUT (1~4):
e POWER LED (GREEN):
the Receiver through a CAT cable, the Power LED will be on.
r DATA SIGNAL INDICATOR (YELLOW):
• Illunimating: HDMI signal with HDCP.
• Flashing: HDMI signal without HDCP.
• Dark: No HDMI signal.
HDMI signal loop output port, connect a HDMI display device such as TV or Monitor
t VIDEO OUT:
with an HDMI cable.
HDMI signal input port, connect to a HDMI source device such as DVD or set-top box
y VIDEO IN:
with an HDMI cable.
IR signal output port. Connect to IR blaster cable, the IR signal is from "IR IN" port of the
u IR-T:
Receiver.
i EDID DIP SWITCH:
Mini USB update port. Connect to PC for firmware updating.
o UP DATE:
a DC 12V:
DC 12V Power input port.
s POWER SWITCH:
Connect to the CAT port of the Receiver with a CAT6 cable.
Transmitter supports one-way POC function. When it supplies power to
Used to set EDID mode. Please refer to Section "EDID Mode" for details.
Press the switch to power on/off the device ("-" for on, "o" for off).
5