A-Neuvideo ANI-0104POE-XT Kullanım Kılavuzu - Sayfa 7

Kablolar ve konektörler A-Neuvideo ANI-0104POE-XT için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. A-Neuvideo ANI-0104POE-XT 12 sayfaları. Extender splitter

Sayfayı Yazdır

OPERATION CONTROLS & FUNCTIONS

Transmitter Panel

When the Transmitter is powered on, the red power LED will illunminate.

q POWER LED:

w CAT OUT (1~4):

e POWER LED (GREEN):

the Receiver through a CAT cable, the Power LED will be on.

r DATA SIGNAL INDICATOR (YELLOW):

• Illunimating: HDMI signal with HDCP.

• Flashing: HDMI signal without HDCP.

• Dark: No HDMI signal.

HDMI signal loop output port, connect a HDMI display device such as TV or Monitor

t VIDEO OUT:

with an HDMI cable.

HDMI signal input port, connect to a HDMI source device such as DVD or set-top box

y VIDEO IN:

with an HDMI cable.

IR signal output port. Connect to IR blaster cable, the IR signal is from "IR IN" port of the

u IR-T:

Receiver.

i EDID DIP SWITCH:

Mini USB update port. Connect to PC for firmware updating.

o UP DATE:

a DC 12V:

DC 12V Power input port.

s POWER SWITCH:

Connect to the CAT port of the Receiver with a CAT6 cable.

Transmitter supports one-way POC function. When it supplies power to

Used to set EDID mode. Please refer to Section "EDID Mode" for details.

Press the switch to power on/off the device ("-" for on, "o" for off).