Kohler Adair K-78872T Installation Instructions Manual - Page 2

Browse online or download pdf Installation Instructions Manual for Toilets Kohler Adair K-78872T. Kohler Adair K-78872T 9 pages. Vtreous china two-piece toilet

Print Page
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
51mm (2") passageway.
·
Water depth from the rim is 157mm.
·
Ensure that the new drain has the correct roughing-in
dimension.
See Fig. #1.
·
Be very careful while working with vitreous china products.
Vitreous china can break or chip if the bolts and nuts are
overtightened, or if carelessly handled.
·
Carefully inspect the new fixture for any sign of
Damage.
·
For new construction, refer to the dimensions in
Fig. #1
and
Fig. #4
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2013).
·
The product complies with GB 6952-2015.
WARNING: Risk of external leakage.
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten 1/4 turn past
finger tight.

TOOLS AND MATERIALS REQUIRED

(Not supplied)
·
254mm (10") adjustable wrench
·
305mm (12") pipe wrench
·
Metal file (file cut)
·
Tape measure
·
Tubing cutter
·
Level
·
Hacksaw
·
Putty knife
·
Screwdriver
·
Toilet gasket (wax seal)
·
Toilet installation flange
·
Toilet T-bolts (2), 8mm (5/6") diameter
·
Toilet supply shut-off valve
NOTICE:
If the existing toilet does not have a shut-off valve
below the tank, install one before installing the new toilet.
* Flexible hose are recommended to connect the supply line
to the fill valve. If you use a rigid connection, take care not to
apply side forces to the bottom of the fill valve.
1280754-T01-B
·
·
·
·
·
·
·
·
·
·
2013)
·
The fill valve
(
·
254mm
·
305mm
·
·
·
·
·
·
·
·
·
·
·
*
-2-
140mm
51mm
157mm
1
GB 6952-2015
1/4
)
(
)
8mm T
(2 )
1
4
ASME
(A112.19.2-