Kohler Adair K-78872T Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Toalety Kohler Adair K-78872T. Kohler Adair K-78872T 9 stron. Vtreous china two-piece toilet

Drukuj stronę

NOTES

Observe all local plumbing and building codes.

Shut off the water supply.

Seat post holes are on 140mm (5-1/2") centers.

51mm (2") passageway.

Water depth from the rim is 157mm.

Ensure that the new drain has the correct roughing-in

dimension.

See Fig. #1.

Be very careful while working with vitreous china products.

Vitreous china can break or chip if the bolts and nuts are

overtightened, or if carelessly handled.

Carefully inspect the new fixture for any sign of

Damage.

For new construction, refer to the dimensions in

Fig. #1

and

Fig. #4

for locating the shut-off valve.

Fixture dimensions are nominal and conform to tolerances

established by ASME Standards (A112.19.2-2013).

The product complies with GB 6952-2015.

WARNING: Risk of external leakage.

nut has been factory-tightened to design specifications.

If re-tightening is required, wrench tighten 1/4 turn past

finger tight.

TOOLS AND MATERIALS REQUIRED

(Not supplied)

254mm (10") adjustable wrench

305mm (12") pipe wrench

Metal file (file cut)

Tape measure

Tubing cutter

Level

Hacksaw

Putty knife

Screwdriver

Toilet gasket (wax seal)

Toilet installation flange

Toilet T-bolts (2), 8mm (5/6") diameter

Toilet supply shut-off valve

NOTICE:

If the existing toilet does not have a shut-off valve

below the tank, install one before installing the new toilet.

* Flexible hose are recommended to connect the supply line

to the fill valve. If you use a rigid connection, take care not to

apply side forces to the bottom of the fill valve.

1280754-T01-B

2013)

The fill valve

(

254mm

305mm

-2-

140mm

51mm

157mm

GB 6952-2015

1/4

)

(

)

8mm T

(2 )

ASME

(A112.19.2-