Kohler 14RESL Installation Manual - Page 24

Browse online or download pdf Installation Manual for Portable Generator Kohler 14RESL. Kohler 14RESL 48 pages. Residential and light commercial generator sets
Also for Kohler 14RESL: Troubleshooting Manual (8 pages)

Print Page

4. Connect the ATS or remote start/stop switch.

Route low-voltage communication leads through

separate conduit.

a. For a Model RRT transfer switch: Connect

the Model RRT transfer switch interface panel

to connections ATS1--ATS4. See Figure 1-21.

Note: To ensure that the controller recognizes the

Model RRT transfer switch, connect leads

ATS1 through ATS4 to the terminal block

before connecting the engine starting

battery.

Generator

Set

1. 14/20RES/RESL generator set field-connection terminal block

2. Controller interface module location on the ATS, typical

3. Interface module connector P14

4. ATS1 through ATS4 on generator set field-connection terminal block

Figure 1-21 Model RRT Transfer Switch Connection to Generator Set Terminal Block

Section 1 Installation

GM66565

b. For a remote start/stop switch or Model RDT

or RSB transfer switch: Connect the engine

start leads from the transfer switch or remote

start switch to terminals 3 and 4 on the terminal

block. Route the engine start leads through

separate conduit from the AC power and load

leads.

5. Connect utility power to the terminal block

connections labelled Utility. Connect to a circuit

that is supplied by the utility source and backed up

by the generator. The power source must be GFCI

protected. See Section 1.8.2 for more information

about the utility power requirement.

Customer

connections

12- -24 AWG

GM63552

TP-6733 8/11

ATS

ADV-7598