a-TroniX 9885377 Instruction Manual - Page 12

Browse online or download pdf Instruction Manual for Extender a-TroniX 9885377. a-TroniX 9885377 16 pages.

Instruction Manual
Jump starter Booster 12/24V 10000/5000A
6. Using the Emergency Starter as
a 12V or 24V Memory Saver
Always wear safety goggles and keep your face away from the battery when
connecting it.
Check that the emergency starter is in the OFF position.
Check the voltage of the vehicle battery.
CAUTION:
Voltage incompatibility between the emergency starter and the voltage of the
vehicle´s electrical system can cause explosions and damage the vehicle,
product and people.
Be sure that the Battery Clips are disconnected.
NOTE:
If the Battery Clips are connected, the „Err8" error, will showed.
Now PRESS „START/STOP", the display show „SET"
Select the correct tension, 12V or 24V, using the selection button
Set „MEMORY SAVER" function.
Now PRESS „START/STOP" for 3 seconds, until „ON" blink on the display.
Release the button and the display show „MEMO"
Connect the Battery Clips and perform the Memory Saver activities.
Identify the pole corresponding to the earth of the vehicle; this is generally
connected to the negative terminal.
CAUTION:
Never switch polarity. Always connect the output conductor with a red battery
clip (+) to the positive pole of the battery and the output conductor with a black
battery clip (-) to the vehicle's earth (ground).
CAUTION:
Inverting polarity can cause explosions, damage the vehicle, product and people.
Page 12
09/2021