a-TroniX 9885377 Kullanım Kılavuzu - Sayfa 12

Genişletici a-TroniX 9885377 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. a-TroniX 9885377 16 sayfaları.

Instruction Manual

Jump starter Booster 12/24V 10000/5000A

6. Using the Emergency Starter as

a 12V or 24V Memory Saver

Always wear safety goggles and keep your face away from the battery when

■

connecting it.

Check that the emergency starter is in the OFF position.

■

Check the voltage of the vehicle battery.

■

CAUTION:

Voltage incompatibility between the emergency starter and the voltage of the

vehicle´s electrical system can cause explosions and damage the vehicle,

product and people.

Be sure that the Battery Clips are disconnected.

■

NOTE:

If the Battery Clips are connected, the „Err8" error, will showed.

Now PRESS „START/STOP", the display show „SET"

■

Select the correct tension, 12V or 24V, using the selection button

■

Set „MEMORY SAVER" function.

■

Now PRESS „START/STOP" for 3 seconds, until „ON" blink on the display.

■

Release the button and the display show „MEMO"

■

Connect the Battery Clips and perform the Memory Saver activities.

■

Identify the pole corresponding to the earth of the vehicle; this is generally

■

connected to the negative terminal.

CAUTION:

Never switch polarity. Always connect the output conductor with a red battery

clip (+) to the positive pole of the battery and the output conductor with a black

battery clip (-) to the vehicle's earth (ground).

CAUTION:

Inverting polarity can cause explosions, damage the vehicle, product and people.

Page 12

09/2021