Aqua Computer AQUASTREAM XT USB User And Installation Manual - Page 17

Browse online or download pdf User And Installation Manual for Water Pump Aqua Computer AQUASTREAM XT USB. Aqua Computer AQUASTREAM XT USB 20 pages.
Also for Aqua Computer AQUASTREAM XT USB: User And Operating Manual (16 pages)

Print Page

aqua

computer

AQUASTREAM XT

14. Alarm configuration(aquasuite)

Select "Alarm configuration" from the device list for the device to be configured.

14.1. Speed signal/Output

Select the signal to be provided through the speed signal output. Available options

are the speed signal of a connected fan or flow sensor, current pump speed or an

artificial speed signal. The check box "Switch off speed signal in case of alarm

condition" determines output behavior during alarm conditions.

14.2. Alarm reporting and alarm limits

Select the data sources to be monitored and set appropriate alarm limits. If the

current reading is below the lower limit or higher than the upper limit, an alarm

will be raised if the check box "Activate alarm evaluation" is set for this value. All

sources that currently raise an alarm are highlighted with a red background color

in the software.

Make sure only to use readings for alarm evaluation that are functional with your

specific setup.

15. System settings aquastream XT (aquasuite)

Select "System" from the device list for the device to be configured.

15.1. Device information

The details displayed here might be required when you contact our service for sup-

port.

15.2. Factory defaults

Click the button "Reset device to factory defaults" for a complete reset of all set-

tings. You will have to completely reconfigure the device after resetting it to factory

defaults!

15.3. Key management

In order to upgrade your aquastream XT pump to a higher version, you will need

the serial number and the device key from the "Device information" section of this

page. Order the desired upgrade from the Aqua Computer web shop and enter

serial number and device key into the "Annotations" field during the checkout pro-

cess. For your convenience, you can also click the button "Buy upgrade key" to

display a help page with all necessary information.

After receiving your activation key from Aqua Computer, enter the key to the box

labeled "Enter upgrade key" and click the "Apply" button. The pump needs to be

restarted after entering the activation key. To do so, save all settings into the pump

Aqua Computer GmbH & Co. KG

- 17 -

Gelliehäuser Str. 1, 37130 Gleichen