Aqua Creek Products F-004PLB-XR Manual - Page 8

Browse online or download pdf Manual for Lifting Systems Aqua Creek Products F-004PLB-XR. Aqua Creek Products F-004PLB-XR 20 pages.

Print Page

Anchor Installation: New Construction

For new pool deck installations, the footing for the pool lift should be at least 3'-6" x 3-6" x 6" deep.

It should be reinforced with one mat of four (4) #4 reinforcing bars (rebar) that are 2" clear from

the top of the new pour. (Reinforcing mesh can be used instead of rebar - check the local code

requirements. See drawing below).

FIGURE 7

The footing for the lift should be tied into the rest of the pool deck on three sides with the rebar

or reinforcing mesh. (Do not tie into the bond beam). The rest of the pool deck can be a typical 4"

thick or thickened per local code requirements. Bond rebar or reinforcing mesh grid according to

local requirements and also bond the anchor system to the rebar/mesh grid.

Revised 11/20/14

V.1.1