A.H.Beard INVIGORATE Assembly And Operation Manual - Page 4

Browse online or download pdf Assembly And Operation Manual for Indoor Furnishing A.H.Beard INVIGORATE. A.H.Beard INVIGORATE 16 pages. Adjustable base assembly and operation manual

Print Page
To keep your adjustable base performing
well for its lifetime:
Do:
•
When replacing batteries in your remote
control remove full set of old batteries and
replace with a full new set.
•
Remove the batteries from your remote
control and motor if your adjustable base
will not be used for a long period of time to
prevent damage caused by battery leakage.
•
Place your adjustable base on flat ground to
avoid damage.
•
Use a compatible mattress for your
adjustable base. A memory foam mattress
or latex mattress is recommended. Some
spring mattresses or pocket spring
mattresses, for example, may not be suitable
for use on your adjustable base. Consult your
mattress specialist to verify your mattress is
compatible.
Don't:
•
Sit on the head or leg section while in
the raised position. It can damage your
adjustable base.
•
Lift or move the base during operation. It
might cause damage to your base.
•
Lift or move your adjustable base by holding
the mattress platform. If it is necessary to lift
or move your adjustable base, hold the cross
bars of its metal frame.
Power Ratings:
Input: AC100-240V 50/60Hz 1.5A
Output: DC29V 1.8A
Protection Class: Class II
4
SAVE THESE INSTRUCTIONS
SERVICING OF DOUBLE-INSULATED
PRODUCTS
In a double-insulated product, two systems of
insulation are provided instead of grounding.
No grounding means is provided on a double-
insulated product, nor is a means for grounding
to be added to the product. Servicing a double-
insulated product requires extreme care and
knowledge of the system and is to be done only
by qualified service personnel.
Replacement parts for a double-insulated
product must be identical to the parts they
replace. A double-insulated product is marked
with the words "DOUBLE INSULATION" or
"DOUBLE INSULATED."
The symbol
is also able to be marked on
the product