DFE STEADYWEB 6 Quick Start Manual - Page 5

Browse online or download pdf Quick Start Manual for Controller DFE STEADYWEB 6. DFE STEADYWEB 6 12 pages. Tension controller
Also for DFE STEADYWEB 6: Operating Instructions Manual (20 pages)

Print Page

USER INTERFACE

For ease of use, the critical-use buttons / critical-awareness

indicators are located consistently from one screen to the next.

Those buttons and indicators include blue On/Off, Auto/Man, and

Display toggle buttons on the bottom of the screen, and Tension

On/Off and Auto/Man status indicators in the upper LH and upper

RH corners of the display. The remaining button in the lower RH

corner is green and displays as Menu, Back or Save, depending

on what screen is current, and is used to advance to other menus,

to back out of menus, or to save selections or adjustments. For

more detail about buttons and indicators, see SECTION 1 - USER

INTERFACE OVERVIEW of the SteadyWeb™ 6 Instruction

Manual (DFE P/N 801-0004), hereafter referenced as The

Manual.

After first connecting the controller to power, the POWER LED will

light, and an error message will display, indicating that transducer

calibration must be completed (for other error messages, see

SECTION 11 - TROUBLESHOOTING of the The Manual).

CALIBRATION

To calibrate the controller, press the Menu button to enter the

menu mode. You can always exit Menu mode and return to

Display mode by pressing the Display button. Reference

Appendix B - MENU HIERARCHY of the The Manual for a

diagram of the complete menu structure.