Aqua Medic Kauderni CF Operation Manual - Page 8

Browse online or download pdf Operation Manual for Aquariums Aqua Medic Kauderni CF. Aqua Medic Kauderni CF 13 pages.
Also for Aqua Medic Kauderni CF: Operation Manual (18 pages)

Print Page

Fig. 3: Bushing or tank fitting (the glass pane is placed between slide ring 3 and rubber ring 2)

1. Thread

2. Rubber sealing

3. Slide ring

4. Nut

There is a blue fitting in the mounted bend of the return line. Here, air is sucked in when the pump in the cabinet

fails. This prevents the formation of communicating pipes and an overflow of the filter tank by returning water.

When starting the aquarium, water has to be filled in until the filter tank is filled up to 10 – 12 cm in the front

part and then the pump has to be started. If the water level in the filter tank decreases, water has to be filled

in until the a.-m. maximum is reached. Take care that enough space is left so that the inflowing water in case

of failure or shutdown of the circulation pump still fits into the filter tank. The cables of circulation pumps or

other parts mounted in the aquarium can be routed through the empty conduit downwards. If a plug is too big

for this, the profile slid onto the rear panel can be cut with a PUK saw so that cables can be led out of the

aquarium at the back. The back side should, however, remain closed to allow the fan to suck in air in the

aquarium and not from the outside.

Skimmer EVO 500

See separate manual. The skimmer is hooked to the rear wall of the filter sump with the holding unit without

screws (refer to Fig. 2).

Lighting aquarius 60 (please refer to the attached manual)

Fig. 4: Holder for aquarius

Take care that no humidity and no salt enters the interior of the lighting system!

•