Aqua Medic Kauderni CF Operation Manual - Page 7

Browse online or download pdf Operation Manual for Aquariums Aqua Medic Kauderni CF. Aqua Medic Kauderni CF 13 pages.
Also for Aqua Medic Kauderni CF: Operation Manual (18 pages)

Print Page

Fig. 2: Filter chamber Kauderni CF

1. Circulation pump DC Runner 2.2

2. Filter sponge

3. Skimmer EVO 500

4. Emergency overflow

5. Filter inlet

In the cabinet, there is a ball valve (Fig. 1, No. 8) that has to be slightly closed to control the water in the

overflow box. If the valve is closed to heavily or the return flow is blocked for some reason, the water rises in

the aquarium and flows to the filter tank through the emergency overflow. In such a case, the ball valve has to

be opened a bit further and all blockages have to be eliminated. If the overflow makes loud noises, the ball valve

has to be closed a bit more so the water is bottled up stronger so that no air is dragged along. At least in the

initial phase this has to be controlled regularly and, if necessary, to be adjusted.

With the supplied PVC tubes with moulded keys on one side for holding the nuts of the bushings (tank fittings),

these nuts can be tightened or released. The bushings have to be installed according to Fig. 3. Always re-tighten

before use. The slide ring and nut have to be mounted manually beforehand and tightened as much as possible.

The rubber slide ring must always be attached to the side of the rotable nut, the rubber gasket on the opposite

side of the panel.