Aqua Medic Kauderni CF 운영 매뉴얼 - 페이지 7

{카테고리_이름} Aqua Medic Kauderni CF에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Medic Kauderni CF 13 페이지.
Aqua Medic Kauderni CF에 대해서도 마찬가지입니다: 운영 매뉴얼 (18 페이지)

페이지 인쇄

Fig. 2: Filter chamber Kauderni CF

1. Circulation pump DC Runner 2.2

2. Filter sponge

3. Skimmer EVO 500

4. Emergency overflow

5. Filter inlet

In the cabinet, there is a ball valve (Fig. 1, No. 8) that has to be slightly closed to control the water in the

overflow box. If the valve is closed to heavily or the return flow is blocked for some reason, the water rises in

the aquarium and flows to the filter tank through the emergency overflow. In such a case, the ball valve has to

be opened a bit further and all blockages have to be eliminated. If the overflow makes loud noises, the ball valve

has to be closed a bit more so the water is bottled up stronger so that no air is dragged along. At least in the

initial phase this has to be controlled regularly and, if necessary, to be adjusted.

With the supplied PVC tubes with moulded keys on one side for holding the nuts of the bushings (tank fittings),

these nuts can be tightened or released. The bushings have to be installed according to Fig. 3. Always re-tighten

before use. The slide ring and nut have to be mounted manually beforehand and tightened as much as possible.

The rubber slide ring must always be attached to the side of the rotable nut, the rubber gasket on the opposite

side of the panel.