CP Electronics MWS3A-AT-PRM Product Manual - Page 3
Browse online or download pdf Product Manual for Security Sensors CP Electronics MWS3A-AT-PRM. CP Electronics MWS3A-AT-PRM 17 pages. Rd ceiling microwave presence detector-switching
Also for CP Electronics MWS3A-AT-PRM: Installation Manual (20 pages)
Print Page
The MWS3A-AT-PRM is designed to be mounted using either:
Flush fixing, or
Surface fixing, using the optional Surface Mounting Box (part no. MWS3A-DBB).
Both methods are illustrated below.
Warning - be careful bending springs when mounting unit.
Flush fixing
1
2
Hole Ø74mm
If the range is compromised by the
ceiling construction / material. Add the
supplied 20mm spacer ring.
Surface fixing
1
2
Hole Ø30mm
MAX
Head locking
1
Remove metal
locking clip from
rear of unit.
Wire stripping details
3
3
2
Adjust head to
required position.
Push clip into position
shown below to lock
head.
To remove clip, lever
out with a small
screwdriver.
4
Attach cable clamp
4
Important
Ensure that the cables are formed as shown
before affixing the cable clamp. The clamp
MUST clamp the outer sheath(s) only.
Bend cores as shown.
Installation
5
3