CP Electronics MWS3A-AT-PRM 제품 설명서 - 페이지 3

{카테고리_이름} CP Electronics MWS3A-AT-PRM에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CP Electronics MWS3A-AT-PRM 17 페이지. Rd ceiling microwave presence detector-switching
CP Electronics MWS3A-AT-PRM에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

페이지 인쇄

The MWS3A-AT-PRM is designed to be mounted using either:



Flush fixing, or



Surface fixing, using the optional Surface Mounting Box (part no. MWS3A-DBB).

Both methods are illustrated below.

Warning - be careful bending springs when mounting unit.

Flush fixing

Hole Ø74mm

If the range is compromised by the

ceiling construction / material. Add the

supplied 20mm spacer ring.

Surface fixing

Hole Ø30mm

MAX

Head locking

Remove metal

locking clip from

rear of unit.

Wire stripping details



Adjust head to

required position.



Push clip into position

shown below to lock

head.



To remove clip, lever

out with a small

screwdriver.

Attach cable clamp

Important

Ensure that the cables are formed as shown

before affixing the cable clamp. The clamp

MUST clamp the outer sheath(s) only.

Bend cores as shown.

Installation