AVP Synthesizers RITMOBOX User Manual - Page 7

Browse online or download pdf User Manual for Synthesizer AVP Synthesizers RITMOBOX. AVP Synthesizers RITMOBOX 8 pages. Analog drum synthesizer with 8-step sequencer

Print Page

Mute/Unmute mode

You can enter the Mute/unmute mode on the 6

press of SOUND SELECTION

button. In this mode, the steps 1-5 represent the sounds in the order of their

priority: 1-CH, 2-OH, 3-G1, 4-G2, 5-G3. By default, the indicators on the steps will

all be lit. Just press on the needed sound step to mute or unmute it. If the sound

is unmuted, the led indicator of the chosen sound will be off.

SAVE button

Hold the SAVE button (one of the 8 steps will start to blink, indicating on which

current slot you have a saved pattern at that moment) and then press one of the

8 step buttons to select where the pattern will be saved.

By default, the 1-8 slots for saving are selected (out of 16). This saves all 16 steps

of each of the eight sounds of the current pattern. RITMOBOX has overall 16

saving slots.

If you want to save a pattern to slots 9-16:

Press and hold the SAVE button, press on 9-16 button ones (one of the 8 steps

will start to blink, indicating on which current slot you have a saved pattern at

that moment), then press one of the 8 step buttons to select where the pattern

will be saved and finally release the SAVE button to store it to that location.

LOAD button

Press the LOAD button (one of the 8 steps will start to blink, indicating on which

current slot you are located at that moment) and then one of the 8 step buttons

to select the pattern to load. This will load all 16 steps of each of the eight sounds

from the saved pattern. RITMOBOX has overall 16 loading slots.

If you want to load a pattern stored in slots 9-16:

Press and hold the LOAD button, press on 9-16 button ones (one of the 8 steps

will start to blink, indicating on which current slot you are located at that

moment), then press one of the 8 step buttons to select where the pattern will be

loaded from and finally release the LOAD button to recall the selected pattern.

CLEAR function

In order to delete the programmed sequence of a particular sound section, you

need to short press the LOAD button then release it and press the SAVE button. In

order to delete the entire programmed sequence using several or all of the sound

sections, you need to short press the SAVE button then release it and press the

LOAD button.