AVP Synthesizers RITMOBOX Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Sintetizador AVP Synthesizers RITMOBOX. AVP Synthesizers RITMOBOX 8 páginas. Analog drum synthesizer with 8-step sequencer
Imprimir página
Mute/Unmute mode
th
You can enter the Mute/unmute mode on the 6
press of SOUND SELECTION
button. In this mode, the steps 1-5 represent the sounds in the order of their
priority: 1-CH, 2-OH, 3-G1, 4-G2, 5-G3. By default, the indicators on the steps will
all be lit. Just press on the needed sound step to mute or unmute it. If the sound
is unmuted, the led indicator of the chosen sound will be off.
SAVE button
Hold the SAVE button (one of the 8 steps will start to blink, indicating on which
current slot you have a saved pattern at that moment) and then press one of the
8 step buttons to select where the pattern will be saved.
By default, the 1-8 slots for saving are selected (out of 16). This saves all 16 steps
of each of the eight sounds of the current pattern. RITMOBOX has overall 16
saving slots.
If you want to save a pattern to slots 9-16:
Press and hold the SAVE button, press on 9-16 button ones (one of the 8 steps
will start to blink, indicating on which current slot you have a saved pattern at
that moment), then press one of the 8 step buttons to select where the pattern
will be saved and finally release the SAVE button to store it to that location.
LOAD button
Press the LOAD button (one of the 8 steps will start to blink, indicating on which
current slot you are located at that moment) and then one of the 8 step buttons
to select the pattern to load. This will load all 16 steps of each of the eight sounds
from the saved pattern. RITMOBOX has overall 16 loading slots.
If you want to load a pattern stored in slots 9-16:
Press and hold the LOAD button, press on 9-16 button ones (one of the 8 steps
will start to blink, indicating on which current slot you are located at that
moment), then press one of the 8 step buttons to select where the pattern will be
loaded from and finally release the LOAD button to recall the selected pattern.
CLEAR function
In order to delete the programmed sequence of a particular sound section, you
need to short press the LOAD button then release it and press the SAVE button. In
order to delete the entire programmed sequence using several or all of the sound
sections, you need to short press the SAVE button then release it and press the
LOAD button.
7
www.avpsynth.com