ABACUS Aquanova Scorpio 1800 Information Pack - Page 4

Browse online or download pdf Information Pack for Bathroom Aid ABACUS Aquanova Scorpio 1800. ABACUS Aquanova Scorpio 1800 18 pages. Fixed seat & transfer system operation

Print Page

Pre - Installation Requirements

Access

When deciding on the positioning of the bath there are a number of points that should

be taken into consideration:

1. Hoist/wheelchair access

2. Service/cleaning access

3. Positions of any existing under oor pipe work or cabling

4. Con ict between doorways

5. Distance from walls/other objects

IMPORTANT - The bath must be sited at least 25mm away from any wall to ensure there

are no nger trap areas. It is usual to give around 100mm clearance to allow for easier

servicing if possible.

Flooring

Prepare the oor area and ensure it is at, level and structurally sound & there are NO

SERVICES BURIED within the oor xing area. For clarity there should be no services within

the space detailed on "Location of Bath End Feet Assembly" diagram.

Service Feeds - See Plumbing Diagrams A & B

Plumbing

This can be either wall or oor fed.

Feeds should be as follows: 22mm hot water inlet; 22mm cold water inlet; 40mm waste

outlet @ 3ltr/Sec. Plumb according to Plumbing Diagrams. Feeds should terminate with

isolating valves.

End Wall feeds.

Plumbing to terminate as per position A. Plumbing tails should be left at 325mm length.

Side Wall Plumbing Feed.

Plumbing to terminate as per position B. Plumbing tails should be left at 125mm length.

Floor Feeds

Plumbing to terminate as per position A or B. Tails c/w elbow should be left at 65mm

height o

oor.