Aqua PRO VIGOH80 Instructions Manual - Page 2

Browse online or download pdf Instructions Manual for Swimming Pool Heater Aqua PRO VIGOH80. Aqua PRO VIGOH80 11 pages. Heat pump pool and spa heater

Print Page

Installation

Procedures

(continued)

THE UNIT MUST BE TRANSPORTED IN THE UP-

RIGHT POSITION AT ALL TIMES AND MUST

NOT BE DROPPED OR TAILGATED. DAMAGE

TO THE UNIT DURING TRANSPORTATION

IS NOT THE RESPONSIBILITY OF THE

MANUFACTURER. IF UNIT IS CLOSER THAN

18 INCHES, THE MANUFACTURER IS NOT

RESPONSIBLE FOR BAD, WORN OR SEIZED

FAN MOTORS AND CAPACITORS.

UNIT LOCATION

If unit is closer

than 18 inches, the

manufacturer is not responsible for bad,

worn or seized fan motors and capacitors.

Figure 2 - Recommended

installation layout

Figure 1 -

Unit Location

NOTE: This type of constant watering

directly on the unit can void your

warranty.

UNITS WILL HAVE CONDENSATION.

THIS SHOULD NOT BE MISTAKEN FOR

A LEAK IN THE UNIT.

PLUMBING

HEAT PUMPS ARE TO BE INSTALLED OUTSIDE.

NO CHEMICAL TANKS SHOULD BE LOCATED

WITHIN 5 FT. OF THE HEAT PUMP.

Draining is necessary to prevent

damage to the condenser shell and coil

due to the expansion of freezing water.

Intentional setting of the water FLow

outside of these guidelines will void

ALL

the warranty.

NOTE: Do not place chlorine tablets,

or any other chemicals directly in

skimmer basket. Doing this will void

the warranty.

ELECTRICAL CONNECTIONS

must be performed by a qualiﬁed

electrician. Installations must be in

accordance with local and national codes.

IF INSTALLING MORE THAN

ONE UNIT, CALL TO GET ALL

INSTALLATION SPECS

All wiring and

electrical connections