Abacus Electric EVOLVEO FitBand B2 Quick Start Manual - Page 3
Browse online or download pdf Quick Start Manual for Fitness Trackers Abacus Electric EVOLVEO FitBand B2. Abacus Electric EVOLVEO FitBand B2 6 pages.
Print Page
Sit comfortably on a chair, with feet on the floor. Place your hand intended to
•
measure on loosely on the mat or chair armrest.
Do not speak during the measurement.
•
Switch to the blood pressure measurement mode
Press and hold the "A" the stethoscope icon on the display indicates that the
measurement is taking, after about 20 seconds the result will be displayed.
In our case, the result of a blood pressure measurement is 115 to 75.
If a "!" symbol appears next to the stethoscope instead of the measured pressure, it
means the measurement was not successful.
This may occur due to insufficient contact between the bracelet and your skin, move
the bracelet body on the finger a bit or use another finger to measure on, and then re-
measure.
Another reason may be your hand is cold, and therefore the blood flow is weaker. Try
to warm your palms and fingers by rubbing your hands together, shaking your wrists,
or clench your fist for 10 seconds, then open, if necessary repeat several times in a
row. Then perform the measurement again.
Waterproof according to IP67
EVOLVEO FitBand B2 has got the IP67 certification. It is waterproof if the following
conditions are observed: it is not submerged deeper than 1.2 meter for 30 minutes
and it is fresh water.