Abacus Electric EVOLVEO FitBand B2 Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Fitness Trackers Abacus Electric EVOLVEO FitBand B2. Abacus Electric EVOLVEO FitBand B2 6 pages.

Print Page

Occasional use in chlorinated pools is possible if the bracelet is rinsed with clean

water afterwards.

Do not use in seawater or saltwater pools. Do not use when showering or taking bath

in warm water. If the product is used incorrectly, you will lose the warranty.

Turning on, pairing and connecting with the applicaton

Android: EVOLVEO Fit

iOS: EVOLVEO Fit

Press and hold the spot "A" for about 2 seconds to turn the device on. Download and

EVOLVEO Fit

install the "

application. Turn on the Bluetooth feature on your device such as Smartphone or

Tablet. In the application, press the "Devices". Then press the "Add a new device".

Select the "EVOLVEO Fitband B2". The application will search for Bluetooth devices

nearby. The found fitness bracelet appears in the application as "B2". Click on it, the

fitness bracelet will vibrate and be waiting for confirmation, which you perform by

pressing and holding the spot "A" for about 2 seconds. When successfully paired, the

application shows "paired" and the fitness bracelet is displayed as connected with a

Bluetooth symbol and battery next to it.

Turning off and restarting

To turn the device off, proceed as follows. Set the screen to default, i.e. time and date.

Press and hold the spot "A" for about 2 seconds, a small "1" symbol will appear on the

display under the battery indicator, hold the spot "A" for 2 seconds again, a small "2"

symbol will appear, repeat again and a small "3" symbol will appear. Repeat it for the

fourth time and an "off" symbol will appear. Finally press and hold the spot "A" for 2

seconds again to turn the device off. To restart the device, follow the same steps up to

the last one, then press the spot "A" briefly and an "arrow in a circle" restart symbol

will

appear,

2 seconds to restart the device. All measured data will be erased and the bracelet will

start measuring from zero. The third function following after restarting the device is

there to check the bracelet vibration; it can be repeatedly activated by holding the spot

"A" for 2 seconds.

Exception clause

Heart rate and blood pressure measurement outputs are not intended as medical

or diagnostic background data.

" application from Google Play. Register and log in to the

after

that

press

and

hold

the

spot

"A"

for