DFI ST102-SD Installation Manual - Page 2

Browse online or download pdf Installation Manual for Industrial PC DFI ST102-SD. DFI ST102-SD 7 pages.

Print Page

Removing the Chassis Cover

Installing internal components requires you to remove the chassis cover first.

Please observe the following guidelines and follow the procedure to open the

system.

1. Make sure the system and all other peripheral devices connected to it have

been powered off.

2. Disconnect all power cords and cables.

3. The 2 mounting screws on the rear side of the system are used to secure the

cover to the chassis. Remove these screws and put them in a safe place for

later use.

Mounting

screw

4. Slide the cover backwards to open the system. The SODIMM sockets and

SATA drive bay are readily accessible after removing the chassis cover.

SATA drive bay

ODD drive bay