DFI ST102-SD Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przemysłowy komputer PC DFI ST102-SD. DFI ST102-SD 7 stron.

DFI ST102-SD Instrukcja instalacji

Removing the Chassis Cover

Installing internal components requires you to remove the chassis cover first.
Please observe the following guidelines and follow the procedure to open the
system.
1. Make sure the system and all other peripheral devices connected to it have
been powered off.
2. Disconnect all power cords and cables.
3. The 2 mounting screws on the rear side of the system are used to secure the
cover to the chassis. Remove these screws and put them in a safe place for
later use.
Mounting
screw
4. Slide the cover backwards to open the system. The SODIMM sockets and
SATA drive bay are readily accessible after removing the chassis cover.
SATA drive bay
2
ODD drive bay