AVS 6000 User Manual - Page 2

Browse online or download pdf User Manual for Car Alarm AVS 6000. AVS 6000 7 pages. Alarm system

Print Page

INTRODUCTION

Thank you for purchasing the AVS 6000 alarm system for your vehicle. The AVS

6000 is designed to provide a high level of protection for your vehicle and has been

tested and certified to meet AS/NZS3749.1:1997.

SYSTEM FEATURES

Auto-immobilisation:

The AVS 6000 will automatically immobilise 38 seconds after the ignition is switched

OFF. The LED on the dash will light solid to indicate it is in auto immobilise mode.

Arm by remote (and lock if central locking is connected):

The system is activated by pressing the bottom button on the remote control. The

indicators will flash once and the siren will chirp once. If central locking is connected

the doors will lock. The LED light on the dash will stay on for 20 seconds then flash.

NOTE: For silent arm press the left and bottom button on the remote together.

Disarm by remote:

To disarm the system, press the bottom button on the remote. The indicators will

flash twice and the siren will chirp twice. The LED will stop flashing. If central locking

is connected the doors will unlock.

NOTE: If the alarm was activated while you were away from the vehicle the system

will flash the indicators and chirp the siren four times.

NOTE: For silent disarm press left and bottom button on the remote together.

Low remote battery warning:

When the battery in the remote is almost flat the remote's LED will flash instead of

lighting constantly when a button is pressed.

LED torch:

Push top button on remote.

Auto re-arm and re-lock: (programmable):

If the system is disarmed and a door is not opened within 60 seconds it will re-arm

and re-lock the doors (if central locking is connected).

Door ajar warning:

If the vehicles doors are not properly closed when you try to activate the immobiliser

system, the indicators will flash and the siren will chirp six times to alert you that the

vehicle is not secure.

Panic/car finder:

The panic function is operated by pushing the right button on the remote. Cancel

panic by pushing the right button again.