DG Flugzeugbau DG-1001 Building Instructions - Page 2
Browse online or download pdf Building Instructions for Toy DG Flugzeugbau DG-1001. DG Flugzeugbau DG-1001 6 pages. All fiberglass 1/8 scale sailplane
Print Page* fiberglass fuselage,
* fiberglass wing, double-high airbrakes installed,
* winglets
* horizontal stabilizer,
* rudder,
* canopy,
* canopy frame,
* wing connecting rod,
* bag with accessories
* stickers,
* building instructions
To finish the model you need:
* cyanoacrylate glue,
* 5-min epoxy glue,
* common modeller's tools (sharp knife, drilling machine, screwdriver, fine round file,
sandpaper)
To fly you need:
* 4 channel RC set and 6 servos (at least 5 of them micro size)
Attention! Thank you to us immediately, if you note a missing part or a damaged part. We
cannot control the dexterity of the modeler and cannot influence the builder during the assembly
or the use of this radiocontrolled model, thus we will in no way accept or assume responsability
or liability for damages resulting from the use of this user assembled product.
You are responsible for running this model. A damage to property or health might arise by
improper use of this product. This is why you have to keep a safe distance from the buildings and
other developed areas when flying. Make sure that you are the only one who is flying on the
same waveband.
The product may only be used by the children over 14, supervised by adults.
The purchaser/user accepts all the responsibilities in the event of structural or mechanical
problems.
Warning, this is not a toy!