Avtech AVT532 User Manual - Page 4

Browse online or download pdf User Manual for Security Camera Avtech AVT532. Avtech AVT532 6 pages. Hd cctv total solution, ir dome camera

Print Page

INSTALLATION

Step 1: Uncover the dome camera by loosening the screws on the housing with the supplied wrench

(

Figure 1

Step 2: Check your desired viewing angle of the camera. According to the viewing angle and the instruction of

the installation sticker, paste the sticker up in an appropriate position on the wall or ceiling.

Step 3: Follow the instruction printed on the sticker as the

Step 4: Locate the three holes on the camera as

Figure 1

Step 5: Screw the camera in place and power up your camera

Step 6: Check the viewing angle on a CCTV test monitor.

Step 7: Adjust the viewing angle of the camera again, if necessary.

Step 8: Replace the dome cover in a proper position, adjust the transparent dome cover for not to cover the

lens, align the hole on the dome cover to in order not to have water leakage as Figure 3 and have the

three screws on it tightened.

NOTE: For clear images, please clear of fingerprints the inner part of the dome cover against the lens.

NOTE: n order not to affect waterproof, do not have the lines near the lens pressed while replacing

the transparent dome cover.

FOCAL LENGTH & FOCUS ADJUSTMENT

If you need to adjust the focus, the picture shows you where to adjust.

for adjusting focus

WIRE INDICATION FOR ALARM CONNECTION

COLOR

FUNCTION

Yellow

ALARM IN

Lens

for adjusting focal length

COLOR

Blue

to drill the three holes.

Figure 2

. They are where the three supplied screws belong.

Figure 3

Figure 2

FUNCTION

ALARM OUT

Figure 3

COLOR

FUNCTION

Black

GND