Dell PowerEdge 2550 Rack Installation Instructions - Page 17

Browse online or download pdf Rack Installation Instructions for Laptop Dell PowerEdge 2550. Dell PowerEdge 2550 40 pages. Wake-on-lan (wol) support on dell servers
Also for Dell PowerEdge 2550: Installation Manual (26 pages), Install Manual (32 pages), Configuration Manual (10 pages), Activation Manual (32 pages), Installation Manual (32 pages), Manual (28 pages), Manual (15 pages)

Print Page

F i g u r e 1 - 9 . S e c u r i n g t h e S y s t e m i n t h e R a c k ( F l u s h - M o u n t e d Tr a y

S h o w n o n U n i v e r s a l - H o l e S p a c i n g R a c k )

captive

fastener

Attach the front bezel, if one is available, to the system (see the system Installation

and Troubleshooting Guide for instructions).

You have completed the installation of the two-post support tray rack.

Two-Post RapidRails Kit

The two-post RapidRails rack kit is used to install a Dell system in a two-post, open-frame

relay rack, such as those found in telecommunications equipment facilities. Both 3-inch

and 6-inch wide two-post racks are accommodated. You can install this kit in a center-

mount or a flush-mount configuration. The kit incorporates slide assemblies, which enable

the system to be pulled out of the rack cabinet for servicing.

You must properly secure the two-post, open-frame relay rack to the floor, the ceiling or

upper wall, and where applicable, to adjacent racks, using floor and wall fasteners and

bracing specified or approved by the rack manufacturer or by industry standards. See the

two-post, open-frame relay rack manufacturer's installation documentation for

precautionary warnings before attempting this installation.

CAUTION: Do not attempt to install the system into a two-post, open-frame relay

rack that has not been securely anchored in place. Damage to the system and

personal injury may result.

Ra c k In s ta l lati on Gui de

1-11