Allied Telesis AR400 Series Quick Install Manual - Page 9

Browse online or download pdf Quick Install Manual for Software Allied Telesis AR400 Series. Allied Telesis AR400 Series 12 pages. How to set up pppoe between a linux client and access concentrator
Also for Allied Telesis AR400 Series: How To Configure (6 pages), Troubleshooting Manual (8 pages), Troubleshooting (5 pages), Quick Install Manual (8 pages), Safety Information Manual (18 pages), How-To (8 pages)

Print Page

Quick Install Guide

C613-04032-01 REV E

Enable IP.

At the CLI, enter the command:

enable ip

Assign an IP address to VLAN1.

Assign the VLAN1 interface an IP address in the subnet that the PC uses,

using the command:

add ip interface=vlan1 ip=ipaddress mask=mask

Browse to the GUI.

If you access the Internet through a proxy server, set your browser to

bypass the proxy for the IP address you assigned to the VLAN1 interface.

Point your web browser at the IP address of the VLAN interface.

At the log in prompt, enter the log in name and password. Passwords are

case sensitive.

User Name: manager

Password: friend

The system status page appears and you can now use the GUI to configure

the router.

To ensure configuration settings are saved correctly, use the GUI menus and buttons to

navigate, not your browser's buttons.

As a security precaution, change the password as soon as possible.

To change the password, select Management > Users from the sidebar

menu. Select the Manager account and click Modify.

To access context-sensitive help in the GUI.

Click on the Help Button [Help]. The Help button is located at the top of

the sidebar menu or on any popup page.

Connecting the Data Cables

Connecting the router to your network:

Connect to the LAN

If you have not already done so, use straight-through Ethernet patch cables

to connect the device(s) on your private network (LAN) to the router's

switch port(s). By default, all switch ports are members of VLAN1.