Dell E05B001 Reference Manual - Page 13

Browse online or download pdf Reference Manual for Server Dell E05B001. Dell E05B001 29 pages.

Print Page

Option

Description

Option

Model

Drive Type

Capacity

NVMe Settings

The NVMe settings enable you to set the NVMe drives to either RAID mode or Non-RAID mode.

NOTE:

To configure these drives as RAID drives, click System BIOS Settings > SATA Settings > Embedded SATA

Option and enable RAID mode. If not, you must set this field to Non-RAID mode.

View NVMe settings

To view the NVMe Settings screen, perform the following steps:

Steps

1. Turn on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE:

If your operating system begins to load before you press F2, wait for the system to finish booting, and then

restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

4. On the System BIOS screen, click NVMe Settings.

NVMe Settings details

About this task

The NVMe Settings screen details are explained as follows:

Option

Description

NVMe Mode

Enables you to set the NVMe mode. This option is set to Non RAID by default.

Boot Settings

You can use the Boot Settings screen to set the boot mode to either BIOS or UEFI. It also enables you to specify the boot

order.

● BIOS: The BIOS Boot Mode is the legacy boot mode. It is maintained for backward compatibility.

● UEFI: The Unified Extensible Firmware Interface (UEFI) is a new interface between operating systems and platform

firmware. The interface consists of data tables with platform related information, also boot and runtime service calls that are

available to the operating system and its loader. The following benefits are available when the Boot Mode is set to UEFI:

Description

Specifies the drive model of the selected device.

NOTE:

If no device is installed, it displays Unkown.

Specifies the type of drive attached to the SATA port.

NOTE:

If no device is installed, it displays Unkown Device.

Specifies the total capacity of the drive. This field is undefined for removable media

devices such as optical drives.

NOTE:

If no device is installed, it displays N/A.

BIOS and UEFI