Dell PowerEdge 2800 Conversion Manualline - Page 15
Browse online or download pdf Conversion Manualline for Server Dell PowerEdge 2800. Dell PowerEdge 2800 36 pages. Poweredge 2800 server
Also for Dell PowerEdge 2800: Information Update (24 pages), Installation Manual (22 pages), Manual (44 pages), Hardware Installation (14 pages), Quick Reference (2 pages), Specifications (2 pages)
Print Page
Y1001bk0.book Page 13 Thursday, July 8, 2004 4:32 PM
Figure 1-5. Drive Tray in Maintenance Position
captive screw
drive tray
release lever
Remove the control panel assembly.
Orient the system as shown in Figure 1-6.
a
Disconnect the control panel cable from the SCSI backplane.
b
Inside the drive tray, open the control panel cable clamp. See Figure 1-6.
c
Using a #2 Phillips screwdriver, remove the three screws that secure the tower control
d
panel assembly to the front panel.
Slide the control panel assembly back away from the front panel and remove the assembly
e
and cable from the chassis.
NOTE:
While removing the control panel assembly, be careful not to damage the interface cable.
Tower-to-Rack and Rack-to-Tower Conversion Guide
13