Dell PowerEdge 2950 Instructions Manual - Page 8
Browse online or download pdf Instructions Manual for Server Dell PowerEdge 2950. Dell PowerEdge 2950 15 pages. Cabling instructions for the -48 vdc power supply
Also for Dell PowerEdge 2950: Information Update (50 pages), Installation Information (11 pages), Installation Manual (10 pages), Update (2 pages)
Print Page
Assembling and Connecting the Safety Ground Wire
1 Strip the insulation from the end of the green/yellow wire, exposing approximately 4.5 mm
(0.175 inches) of copper wire.
2 Using a hand-crimping tool, crimp the ring-tongue terminal to the green/yellow wire.
3 Connect the safety ground to the grounding post on the back of the system using a #8-32 nut
equipped with a locking washer (see Figure 1-2).
Figure 1-2. Power Supply Safety Ground
1
green/yellow safety ground
4
#8-32 nut
Connecting the –48 VDC Power Cable
To connect the
–48 VDC
6
Cabling Instructions for the –48 VDC Power Supply
2
1
2
grounding post
power cable, plug the
–48 VDC
3
4
3
power cable into the system power supply.
locking washer