Dell POWEREDGE 4300 Installation Information - Page 3

Browse online or download pdf Installation Information for Server Dell POWEREDGE 4300. Dell POWEREDGE 4300 6 pages. System board upgrade
Also for Dell POWEREDGE 4300: Installation Information (6 pages), Installation Manual (28 pages), Rack Installation (37 pages), Upgrade Installation Manual (14 pages), Rack Installation (34 pages), Upgrade Manual (23 pages), Upgrade Manual (24 pages), Installation Instructions Manual (12 pages), Replacement Manual (3 pages), Installation Manual (14 pages)

Print Page
Dell POWEREDGE 4300 Installation Information
All manuals and user guides at all-guides.com
,QVWDOOLQJWKH'ULYH&DJH
To install the drive cage, perform the following steps:
1.
Ensure that the drive cage is correctly assembled:
a.
Verify that the 1 x 2 backplane is connected to the edge of the auxiliary SCSI
backplane via a 100-pin connector.
b.
Verify that the auxiliary SCSI backplane is inserted into the enclosure on the
side of the cage and secured with one screw.
c.
Verify that the 1 x 2 backplane is secured to the back of the cage with four
screws.
d.
Verify that a drive rail is attached to each side of the drive cage.
2.
Insert the drive cage into the empty peripheral drive bay until the clips on the
drive rails snap into the sides of the peripheral drive bay (see Figure 1).
drive cage
drive rail
clip
)LJXUH,QVWDOOLQJWKH'ULYH&DJH
,QVWDOOLQJWKH,
&([WHQVLRQ&DEOH
2
To install the I
C extension cable, perform the following steps:
2
1.
Disconnect the I
C cable from the 20-pin connector on the system board and set
it to one side (see Figure 2).
Dell PowerEdge 6300 and 4300 Systems 1 x 2 Backplane Installation Information3