Dell POWEREDGE 4300 Installation Information - Page 5

Browse online or download pdf Installation Information for Server Dell POWEREDGE 4300. Dell POWEREDGE 4300 6 pages. System board upgrade
Also for Dell POWEREDGE 4300: Installation Information (6 pages), Installation Manual (28 pages), Rack Installation (37 pages), Upgrade Installation Manual (14 pages), Rack Installation (34 pages), Upgrade Manual (23 pages), Upgrade Manual (24 pages), Installation Instructions Manual (12 pages), Replacement Manual (3 pages), Installation Manual (14 pages)

Print Page

All manuals and user guides at all-guides.com

,QVWDOOLQJWKH6&6,&DEOH

NOTE: The SCSI cable installation described in this document is a typical installation

of the SCSI cable used with the 1 x 2 backplane. You can install the SCSI cable

differently, depending on redundant arrays of independent disks (RAID) configurations

and the existence of SCSI peripheral cards. Refer to your operating system documen-

tation for information on how to set up your SCSI devices.

To install the SCSI cable to the 1 x 2 backplane, perform the following steps:

In the customer kit, locate the nonterminated 68-pin SCSI cable. (This cable has

two connectors at one end and one connector on the other end. See Figure 3.)

bottom drive

connector

SCSI cable

)LJXUH,QVWDOOLQJWKH6&6,&DEOHWR[%DFNSODQH

Dell PowerEdge 6300 and 4300 Systems 1 x 2 Backplane Installation Information5

top drive connector

SCSI controller

on system board